| 161.25.1077.891.21.1503 Standard 5 Slewing Ring Bearings | B:25 mm; Da max.:91 mm; d:45 mm; Basic dynamic load rating C:55.3 kN; da max.:57.9 mm; Basic static load rating C0:31.5 kN; Mass bearing:0.83 kg; Limiting speed:4500 r/min; D:100 mm; ra max.:1.5 mm; Calculation factor f0:13; D2 ≈:87.5 mm; Calculation factor kr:0.03; r1,2 min.:1.5 mm; d2 ≈:58.256 mm; Fatigue load limit Pu:1.34 kN; da min.:54 mm; |
| 62.25.1255.575.11.1403 Standard 5 Slewing Ring Bearings | Pa:43.2 kN; h:50.8 mm; P150°:80.1 kN; End plug (suffix Y):EPR 16; A1:158.75 mm; P90°:138 kN; Eye bolt:2 x 3/8-16 UNC; P120°:87.2 kN; Cap bolt, SAE grade:5; Housing:SAW 530; Cap bolt:4 x 3/4-10 UNC; L:539.75 mm; Da:269.999 mm; J max.:463.55 mm; R2:39.688 mm; Stabilizing ring:SR-30-0; Labyrinth ring:2 x LOR 128; R1:95.25 mm; H2:63.5 mm; P60°:230 kN; |
| 91.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | H1:169.875 mm; Initial grease fill:793.8 g; P150°:120 kN; P90°:207 kN; da:174.625 mm; J1:95.25 mm; H2:66.675 mm; Ca:89.789 mm; Mass pillow block:121 kg; Cap bolt:7/8-9 UNC; R2:33.337 mm; Cap bolt, SAE grade:8; P60°:345 kN; J max.:488.95 mm; Cap bolt recommended tightening torque:813.5 N·m; A2:288.925 mm; J min.:441.325 mm; Eye bolt:2 x 3/8-16 UNC; Taconite seal:TER 154; Pa:42.9 kN; |
| 61.30.1180.001.21.1504 Standard 5 Slewing Ring Bearings | Initial grease fill:181.44 g; H1:114.3 mm; J1:60.325 mm; P90°:105 kN; L:387.35 mm; Ca:55.804 mm; PosiTrac Plus contact element:2 x B10724-113; Labyrinth ring:2 x LOR 114; Cap bolt recommended tightening torque:298.3 N·m; H2:44.45 mm; R2:30.163 mm; P120°:64.9 kN; P150°:58.7 kN; Cap bolt:5/8-11 UNC; N1:22.225 mm; End plug (suffix Y):EPR 14; A2:155.575 mm; R1:65.088 mm; h:40.481 mm; |
| 11.35.1750.700.11.1503 Standard 5 Slewing Ring Bearings | f:10 mm; Mass lock washer:0.066 kg; d2:112 mm; M:76.5 mm; d1:95 mm; d:80 mm; B:2.5 mm; |
| 61.40.1800.014.29.1503 Standard 5 Slewing Ring Bearings | Axial load factor Y:0.4; Reference speed:1100 r/min; Calculation factor kr:0.4; ra max.:5 mm; Basic static load rating C0:4550 kN; Limiting value e:0.3; d:260 mm; Limiting speed:1900 r/min; D1 ≈:458 mm; Basic dynamic load rating C:3140 kN; Fatigue load limit Pu:400 kN; d1 ≈:350 mm; B:165 mm; r1,2 min.:6 mm; da max.:320 mm; D:540 mm; F:324 mm; da min.:284 mm; s max.:5 mm; |
| 92.25.1154.991.21.1503 Standard 5 Slewing Ring Bearings | d:50 mm; B:35 mm; r, r1,2 min.:0.6 mm; Mass inner ring:0.11 kg; F:55 mm; |
| 62.25.1155.500.11.1503 Standard 5 Slewing Ring Bearings | Calculation factor e:0.35; r1,2 min.:1.5 mm; D:736.6 mm; Mass bearing:345 kg; r3,4 min.:6.4 mm; T:322.262 mm; Calculation factor Y1:1.9; d:558.8 mm; Calculation factor Y2:2.9; Calculation factor Y0:1.8; Basic static load rating C0:14300 kN; Thrust factor K:1.7; B:322.262 mm; d1 ≈:595 mm; Comparative axial load rating CFa:259 kN; Comparative radial load rating CF:1530 kN; D1 ≈:685 mm; Fatigue load limit Pu:1060 kN; |
| 162.36.1900.891.41.1503 Standard 5 Slewing Ring Bearings | RG:3/8 NPT; Cap bolt:5/8-11 UNC; P60°:178 kN; Initial grease fill:232.47 g; Stabilizing ring:SR-22-19; S:4.763 mm; Cap bolt recommended tightening torque:298.3 N·m; P150°:59.6 kN; A2:165.1 mm; PG:1/4 NPT; J1:69.85 mm; P180°:72.5 kN; A1:120.65 mm; R2:31.75 mm; ba:50.006 mm; PosiTrac Plus contact element:2 x B10724-109; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 13; Eye bolt:2 x 3/8-16 UNC; |
| 92.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | H2:31.75 mm; Da:149.873 mm; R1:53.975 mm; P120°:23.1 kN; PG:1/8 NPT; RG:3/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Ca:45.796 mm; Max. speed for Taconite seal:775 r/min; A1:88.9 mm; Mass pillow block:15.9 kg; Pa:16.5 kN; End plug (suffix Y):EPR 13; db:100.013 mm; Housing:FSAF 217; Taconite seal (dc shaft position):TER 63; Cap bolt:2 x 5/8-11 UNC; P180°:25.4 kN; Initial grease fill:218.29 g; |