| 39 1091 01 Rollix Slewing Ring Bearings | RG:1/8 NPT; Housing:SAF 610; H1:76.2 mm; End plug (suffix Y):EPR 4; A1:69.85 mm; PG:1/8 NPT; H2:28.575 mm; Cap bolt, SAE grade:8; R2:19.05 mm; L:269.875 mm; A2:190.5 mm; N1:19.05 mm; J min.:196.85 mm; Cap bolt:2 x 1/2-13 UNC; P150°:12.9 kN; da:44.45 mm; P120°:14.2 kN; Initial grease fill:107.73 g; J max.:228.6 mm; Mass pillow block:10 kg; |
| 68725A Franke Slewing Ring Bearings | Mass housing:339 kg; J6:830 mm; Ca:198 mm; N:50 mm; H1:320 mm; P55°:7000 kN; H2:115 mm; da:341.313 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; J1:200 mm; N1:42 mm; Q120°:2860 kN; Cap bolt, rec. tightening torque:400 N·m; P150°:2200 kN; Oil seal:2 x TSD 3072/13.7/16; Oil level, max.:92 mm; Adapter sleeve:H 3072/13.7/16; A1:330 mm; Da:540 mm; J:750 mm; |
| 7 1830 04 Rollix Slewing Ring Bearings | Da:119.1 mm; N4:4 mm; A3:3.2 mm; Basic static load rating C0:21.6 kN; Recommended diameter for attachment bolts, mm G:14 mm; Fatigue load limit Pu:0.915 kN; Db1:102 mm; A:39 mm; A5:23 mm; Housing material:Cast iron; J:105 mm; Housing:FY 509 M/VZ033; J7:33.5 mm; B1:44 mm; Thread grub screw G2:M6; J6:123 mm; Limiting speed:850 r/min; s1:26.5 mm; N:16 mm; Mass bearing unit:1.95 kg; |
| 68711A Franke Slewing Ring Bearings | C:48 mm; Static (Coa):1090 kN; Dynamic (Ca):790 kN; T:64 mm; rs (min):5 mm; r1s (min):4 mm; B:58 mm; Pu:97.600 kN; r2s (min):1.5 mm; a:68 mm; d2:200 mm; D:360 mm; |
| 2 3074 01 Rollix Slewing Ring Bearings | SKU:23056-b-k-mb-c4-fag; Clearance:C4; Seals or Shields:Open Type; Static Load Rating (kN):2850; Limiting Speed Rating (r/min):1960; Cage Type:Brass; Weight:0.02 KGS; Reference Speed Rating (r/min):1100; Availability:In Stock; d:280mm; Dynamic Load Rating (kN):1780; D:420mm; B:106mm; Fatigue Load Rating (kN):255; |
| 66142L Franke Slewing Ring Bearings | r1,2 min.:1 mm; B:7.5 mm; Mass shaft washer:0.2 kg; d:40 mm; d1:78 mm; |
| 6 2002 Rollix Slewing Ring Bearings | rs (min):2 mm; C:30 mm; D:100 mm; Pu:21.220 kN; d2:45 mm; a:31 mm; Static (Coa):174 kN; Dynamic (Ca):131 kN; r2s (min):0.6 mm; T:38.25 mm; r1s (min):1.5 mm; B:36 mm; |
| 2 1805 02 Rollix Slewing Ring Bearings | RG:1/4 NPT; P180°:40 kN; R2:21.431 mm; Cap bolt:2 x 1/2-13 UNC; Da:130 mm; Pa:6.94 kN; S:3.175 mm; End plug (suffix Y):EPR 7; Max. speed for PosiTrac Plus seal:2350 r/min; A1:79.375 mm; H:161.925 mm; L:285.75 mm; Labyrinth ring:2 x LOR 38; PosiTrac Plus contact element:2 x B10724-37; P90°:59.6 kN; h:28.575 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Housing:SSAFS 515; |
| 69711L Franke Slewing Ring Bearings | Availability:In Stock; d:6mm; Weight:0.20 KGS; SKU:sf606-2z-zen; Seals or Shields:Two Metal Shields; Clearance:Standard; B:6mm; D:17mm; Cage Type:Steel; |
| 68602A Franke Slewing Ring Bearings | dk:80 mm; B:44 mm; C1 max.:39 mm; d2 max.:137 mm; Mass rod end:6.25 kg; l7 min.:73 mm; Basic static load rating C0:360 kN; Basic dynamic load rating C:245 kN; G:M 60x4; Material constant KM:330; r1 min.:1 mm; l1 min.:120 mm; l2 max.:296 mm; Specific dynamic load factor K:100 N/mm²; α:6 °; h:225 mm; d:60 mm; |