| No. | Brand | a | J | F | l | D | G | s | H |
| 5204NR | NTN | - | - | - | - | - | M 170x3 | - | - |
| 3209-BD-2HRS-TVH-C3 | FAG | - | - | - | - | 190.0000 mm | - | - | - |
| 7003L1 | NTN | - | - | - | - | 78 mm | - | - | - |
| 7602040-TVP | FAG | - | - | - | - | - | - | - | - |
| 7201BWG | NSK | - | - | - | - | - | - | - | 156 mm |
| 7311BL1G/GN | NTN | - | - | - | - | - | - | - | - |
| 7264-B-MP-UA | FAG | - | - | - | - | 62.0000 mm | - | - | - |
| 7204BMPC | NSK | - | - | - | - | - | - | - | - |
| 7302-B-TVP-UA | FAG | - | - | - | - | - | - | - | - |
| 7302-B-TVP-UO | FAG | - | - | - | - | 200.0000 mm | - | - | - |
| 3308-BD-TVH | FAG | 37 mm | - | - | - | 160 mm | - | - | - |
| 3218 | FAG | - | - | - | - | - | - | - | - |
| 7238-B-MP-UA | FAG | - | - | - | - | 420 mm | - | - | - |
| 3307-BD-2Z-TVH | FAG | - | - | - | - | 800 mm | - | - | 105 mm |
| 3308-BD | FAG | - | - | - | - | 240 mm | - | - | - |
| 7312BL1BG | NTN | - | - | - | - | 140.0000 mm | - | - | - |
| 7232-B-MP | FAG | - | - | - | - | - | - | - | 400.05 mm |
| 7302-B-2RS-TVP | FAG | - | - | - | - | - | - | - | - |
| 5204CZZC3 | NTN | - | - | - | - | 30.0000 mm | - | - | - |
| 5203NRC3 | NTN | - | - | - | - | 110 mm | - | - | - |
| 3220-C3 | FAG | - | - | - | - | - | Tr 630x6 | - | - |
| 5201C3 | NTN | - | - | - | - | - | - | - | - |
| FAG 7302-B-TVP-UO Angular Contact Ball Bearings | Oil Speed Rating Open/Shielded n2:3800 rpm; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:3200 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Fillet Radius ra:2.50 mm; B:45.00 mm; Basic Static Radial Load Rating Co:118000 N; Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:153000 N; D:200.0000 mm; |
| FAG 7248-B-MP-UA Angular Contact Ball Bearings | Lock washer:W 24; Lock nut:AN 24; Pa:27.4 kN; Bearing limiting speed:2800 r/min; PG:1/4 NPT; Mass pillow block:46.7 kg; P90°:111 kN; Ca:85.801 mm; R1:79.375 mm; dc:115.888 mm; |
| FAG 7252-B-MP-UA Angular Contact Ball Bearings | D2 ≈:7.04 mm; Calculation factor kr:0.03; Basic dynamic load rating C:0.312 kN; Mass bearing:0.00092 kg; Basic static load rating C0:0.088 kN; D:8 mm; B:4 mm; Limiting speed:80000 r/min; ra max.:0.15 mm; Da max.:7.2 mm; |
| 0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.433 Inch | 11 Millimeter NSK 7202BWG Angular Contact Ball Bearings | Housing:SAF 312; PosiTrac Plus contact element (dc shaft position):B10724-32; Bearing:22312 E; Appropriate attachment bolt size G:0.625 in; Max. speed for PosiTrac Plus seal:2150 r/min; Labyrinth ring (db shaft position):LOR 47; Cap bolt recommended tightening torque:149.1 N·m; P180°:20 kN; H2:30.163 mm; da:60 mm; Size (mm):0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.433 Inch | 11 Millimeter ; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter NSK 7206BMPC Angular Contact Ball Bearings | Basic static load rating C0:355 kN; Fatigue load limit Pu:37.5 kN; Reference speed:2400 r/min; U:32 mm; Basic dynamic load rating C:95.2 kN; Fw:175 mm; Ew:183 mm; Mass needle roller and cage assembly:0.4 kg; Limiting speed:2600 r/min; Size (mm):1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.63 Inch | 16 Millimeter ; |
| 160 mm x 290 mm x 48 mm FAG 7232-B-MP Angular Contact Ball Bearings | L:711.2 mm; Cap bolt recommended tightening torque:1735.4 N·m; da:201.613 mm; Appropriate attachment bolt size G:1.25 in; H:400.05 mm; End plug (suffix Y):EPR 23; PG:1/4 NPT; P60°:416 kN; N1:34.925 mm; Ca:101.803 mm; Size (mm):160 mm x 290 mm x 48 mm ; |
| 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 3205 Angular Contact Ball Bearings | d:25.000 mm; Oil Speed Rating n2:11000 rpm; B:20.60 mm; Sealed Speed Rating n3:8000 rpm; Basic Dynamic Radial Load Rating C:20800 N; Basic Static Radial Load Rating Co:14000 N; D:52.0000 mm; Accessories:One Shield; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:8000 rpm; Size (mm):0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter ; |
| FAG 3209-BD-2HRS-TVH-C3 Angular Contact Ball Bearings | Oil Speed Rating Open/Shielded n2:3200 rpm; Basic Dynamic Radial Load Rating C:142000 N; Basic Static Radial Load Rating Co:153000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:2600 rpm; D:190.0000 mm; Accessories:One Shield; B:36.00 mm; d:105.000 mm; |
| FAG 7240-B-MP-UA Angular Contact Ball Bearings | Designation bearing:HK 3022; Mass bearing:0.042 kg; Basic static load rating C0:46.5 kN; Radial shaft seal with a low cross-sectional height, double lip:SD 30x37x4; Basic dynamic load rating C:23.8 kN; Fw:30 mm; r min.:0.8 mm; Reference speed:8000 r/min; Limiting speed:9000 r/min; Radial shaft seal with a low cross-sectional height, single lip:G 30x37x4; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter NTN 5206 Angular Contact Ball Bearings | Oil Speed Rating Open/Shielded n2:3000 rpm; B:38.00 mm; Fillet Radius ra:2.00 mm; D:240.0000 mm; Sealed Speed Rating n3:1600 rpm; Basic Dynamic Radial Load Rating C:143000 N; Accessories:Snap-Ring; Basic Static Radial Load Rating Co:143000 N; Grease Speed Rating Open/Shielded n1:2400 rpm; d:160.000 mm; Size (mm):1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter ; |
| 1.575 Inch | 40 Millimeter x 2.441 Inch | 62 Millimeter x 0.945 Inch | 24 Millimeter NTN 7908CDTBTUPV2 Angular Contact Ball Bearings | Fillet Radius ra:2.00 mm; d:420.000 mm; Basic Dynamic Radial Load Rating C:251000 N; Grease Speed Rating Open/Shielded n1:950 rpm; Basic Static Radial Load Rating Co:390000 N; Sealed Speed Rating n3:0 rpm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:1200 rpm; D:520.0000 mm; B:46.00 mm; Size (mm):1.575 Inch | 40 Millimeter x 2.441 Inch | 62 Millimeter x 0.945 Inch | 24 Millimeter ; |
| 12 mm x 37 mm x 12 mm FAG 7301-B-TVP Angular Contact Ball Bearings | Da max.:85.8 mm; r2 min.:1 mm; Basic static load rating C0:610 kN; r1 min.:1 mm; Sealing solution:-; rb max.:1 mm; Lubricant:Maintenance free &nd; d:60 mm; Basic dynamic load rating C:245 kN; Material constant KM:1400; Size (mm):12 mm x 37 mm x 12 mm ; |
| 90 mm x 190 mm x 73 mm FAG 3318 Angular Contact Ball Bearings | 2B:100 mm; r5 min.:1 mm; K:7.5 mm; Reference speed:2200 r/min; Da min.:161 mm; r3,4 min.:2.5 mm; Mass bearing pair:12.4 kg; b:11 mm; Calculation factor Y2:2.3; Da max.:178.5 mm; Size (mm):90 mm x 190 mm x 73 mm ; |
| 30 mm x 72 mm x 30,2 mm FAG 3306-BD-TVH Angular Contact Ball Bearings | Grease Speed Rating Open/Shielded n1:5200 rpm; Oil Speed Rating Open/Shielded n2:6300 rpm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:64400 N; Accessories:One Shield; B:27.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:52000 N; d:50.000 mm; Size (mm):30 mm x 72 mm x 30,2 mm ; |
| FAG 7240-B-MP-UO Angular Contact Ball Bearings | Ca min.:1.2 mm; Da max.:121 mm; Misalignment factor k1:0.099; Limiting speed:6700 r/min; d3:98 mm; da max.:98.3 mm; D:130 mm; Basic dynamic load rating C:196 kN; db min.:80 mm; Mass bearing + sleeve:2.3 kg; |
| FAG 3218-C3 Angular Contact Ball Bearings | Pu:1404.790 kg; Static (Cor):23256 ; B:400 mm; Bearing designation:PLC 512-63 ; d:900 mm; D:1180 mm; Dynamic (Cr):8578.5 kN; B1:280 mm; Weight:1100 ; |
40 mm x 80 mm x 18 mm FAG 7602040-TVP thrust ball
40 mm x 80 mm x 18 mm FAG 7602040-TV... Bearing No. 7602040-TVP. Size. 40x80x18 mm. Bore Diameter. 40 mm. Outer Diameter. 80 mm. Width. 18 mm d
Bearing 7602040-TVP (FAG) | Size and Specification
Axial angular contact ball bearings 7602040-TVP. Bearing number : 7602040-TVP. Size (mm) : 40x80x18. Brand : FAG. Bore Diameter (mm) : 40
FAG 7602040-TVP Axial angular contact ball bearings
FAG 7602040-TVP single direction Axial angular contact ball bearings with polyamide cage, guided by balls. Due to the contact angle of 60°, the bearings can
FAG | 7602040-TVP | Thrust Angular Contact Ball Bearing | Applied
Shop FAG 7602040-TVP at Applied.com, which includes; Thrust Angular Contact Bearing Type, 40 mm Inner Diameter, 80 mm Outer Diameter, 18 mm Width
7602040-TVP | Angular Contact Ball Bearings | Ball Bearings
7602040-TVP. ... FAG BEARING. Manufacturer Name. SCHAEFFLER GROUP. Minimum Buy Quantity. N/A. Weight / Kilogram. 0.445. EAN. 4012801166713
FAG (Schaeffler) - 7602040-TVP - Motion Industries
FAG (Schaeffler) 7602040-TVP. Angular Contact Bearing - 40 mm Bore, 80 mm OD, 18 mm Width, Open, 60 ° Contact Angle, C0
Axial angular contact ball bearings - 7602040-TVP - medias
Axial angular contact ball bearings 7602040-TVP, single direction, with contact angle α. Radial load Axial load in one direction Not sealed Grease lubrication
FAG 7602040-TVP Bearing | 7602040-TVP - 2D
Brand Name: FAG . FAG 7602040-TVP single direction Axial angular contact ball bearings with polyamide cage, guided by balls. Due to the contact angle of 60°,
FAG 7602040-TVP Ball Screw Support Bearings, 40 mm ID
FAG 7602040-TVP Ball Screw Support Bearings, 40 mm ID, 80 mm OD, 18 mm Width: Amazon.com: Industrial & Scientific
40 mm x 80 mm x 18 mm FAG 7602040-TVP Angular Contact Ball Bearings Video