| No. | Brand | a | J | F | l | D | G | s | H |
| 5205CZZC3 | NTN | - | - | - | - | - | 49.962 mm | - | - |
| 5205CLLU | NTN | - | - | - | - | 290.0000 mm | - | - | - |
| 5201C3 | NTN | - | - | - | - | - | - | - | - |
| 3206-BD-2Z-TVH | FAG | - | - | - | - | 380.0000 mm | - | - | - |
| 3308-BD-2Z-TVH | FAG | - | - | - | - | - | - | - | - |
| 7303-B-2RS-TVP | FAG | - | - | - | - | - | - | - | - |
| 7303-B-TVP-UO | FAG | - | - | - | - | - | - | - | - |
| 3308-BD-TVH | FAG | 37 mm | - | - | - | 160 mm | - | - | - |
| 7205BMPC | NSK | - | - | - | - | - | - | - | - |
| 3322/4SQT | NTN | - | - | - | - | 100.0000 mm | - | - | - |
| 3310-BD-TVH | FAG | - | - | - | - | - | - | - | - |
| 5205C2/5K | NTN | - | - | - | - | - | - | - | - |
| 7302-B-TVP | FAG | - | - | - | - | 62.0000 mm | - | - | - |
| 7205BWG | NSK | - | - | - | - | - | Tr 1000x8 | - | - |
| 7207BEAT85 | NSK | - | 111.125 mm | - | - | - | - | - | - |
| 5204C3 | NTN | - | - | - | - | 270.0000 mm | - | - | - |
| 5203NRC3 | NTN | - | - | - | - | 110 mm | - | - | - |
| 7322BGM | NTN | - | - | - | - | - | - | 23 mm | - |
| 7301-B-TVP | FAG | - | - | - | - | - | - | - | - |
| 3209-BD | FAG | - | - | - | - | 160.0000 mm | - | - | - |
| 5205CZZ | NTN | - | - | - | - | - | - | - | - |
| 3208-BD-C3 | FAG | - | - | - | - | - | - | - | - |
| 7416-B-MP-UA | FAG | - | - | - | - | 190.0000 mm | - | - | - |
| 7236-B-MP | FAG | - | - | - | - | - | - | - | - |
| 3209-BD-2HRS-TVH-C3 | FAG | - | - | - | - | 190.0000 mm | - | - | - |
| 3208-BD | FAG | - | - | - | - | 140.0000 mm | - | - | - |
| 5206CLLUC3 | NTN | - | - | 50 mm | - | 80 mm | - | 1.5 mm | - |
| 7202BWG | NSK | - | - | - | - | - | - | - | - |
| 50 mm x 110 mm x 44,4 mm FAG 3310-BD-TVH Angular Contact Ball Bearings | r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; dk:66 mm; Da min.:66.2 mm; Sealing solution:Triple-lip seals; Specific static load factor K0:500 N/mm²; Lubricant:Regular relubricatio; b1:4.6 mm; C:28 mm; Basic static load rating C0:780 kN; Size (mm):50 mm x 110 mm x 44,4 mm ; |
| 35 x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter NSK 7207BEAT85 Angular Contact Ball Bearings | Mass bearing unit:4.99 kg; da:44.45 mm; N1:14.287 mm; A6:19.05 mm; L:139.7 mm; S:0.794 mm; A:57.15 mm; B:73.025 mm; J:111.125 mm; Attachment bolt diameter G:12.7 mm; Size (mm):35 x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter ; |
| 20 mm x 52 mm x 15 mm FAG 7304-B-TVP Angular Contact Ball Bearings | Oil Speed Rating n2:12000 rpm; D:52.0000 mm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8500 rpm; Grease Speed Rating n1:8500 rpm; Accessories:Two Shields; Basic Static Radial Load Rating Co:14600 N; d:20.000 mm; B:22.20 mm; Basic Dynamic Radial Load Rating C:22500 N; Size (mm):20 mm x 52 mm x 15 mm ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter NTN 7312BL1BG Angular Contact Ball Bearings | Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:3900 rpm; B:33.00 mm; d:65.000 mm; Fillet Radius ra:2.00 mm; D:140.0000 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Basic Static Radial Load Rating Co:90000 N; Basic Dynamic Radial Load Rating C:102000 N; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter ; |
| 2.165 Inch | 55 Millimeter x 4.724 Inch | 120 Millimeter x 1.142 Inch | 29 Millimeter NTN 7311BL1 Angular Contact Ball Bearings | D:110.0000 mm; Basic Static Radial Load Rating Co:38000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; d:50.000 mm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:6300 rpm; Sealed Speed Rating n3:4300 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; Basic Dynamic Radial Load Rating C:61800 N; Size (mm):2.165 Inch | 55 Millimeter x 4.724 Inch | 120 Millimeter x 1.142 Inch | 29 Millimeter ; |
| FAG 7260-B-MP-UA Angular Contact Ball Bearings | B:24 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor fHC:1.01; r1,2 min.:1.5 mm; r3,4 min.:1 mm; d1:117.38 mm; Calculation factor f2A:1; Mass bearing:1.18 kg; Number of balls z:27; Attainable speed for grease lubrication:12700 r/min; |
| 5.512 Inch | 140 Millimeter x 11.811 Inch | 300 Millimeter x 4.882 Inch | 124 Millimeter NTN 7328BX1WGDB/GL/4SQT Angular Contact Ball Bearings | Dimension L:4.6250 in; Diameter N:0.5469 in; Distance J:3.6250 in; Height T:1.8281 in; Basic Static Radial Load Rating Co:3440 lbf; Basic Dynamic Radial Load Rating:4560 lbf; Weight W:1.37 lb; Dimension A1:1.3750 in; Insert Bearing IB:Stainless Steel; Dimension A2:0.6563 in; Size (mm):5.512 Inch | 140 Millimeter x 11.811 Inch | 300 Millimeter x 4.882 Inch | 124 Millimeter ; |
| FAG 7248-B-MP-UA Angular Contact Ball Bearings | Lock washer:W 24; Lock nut:AN 24; Pa:27.4 kN; Bearing limiting speed:2800 r/min; PG:1/4 NPT; Mass pillow block:46.7 kg; P90°:111 kN; Ca:85.801 mm; R1:79.375 mm; dc:115.888 mm; |
| 160 mm x 290 mm x 48 mm FAG 7232-B-MP Angular Contact Ball Bearings | L:711.2 mm; Cap bolt recommended tightening torque:1735.4 N·m; da:201.613 mm; Appropriate attachment bolt size G:1.25 in; H:400.05 mm; End plug (suffix Y):EPR 23; PG:1/4 NPT; P60°:416 kN; N1:34.925 mm; Ca:101.803 mm; Size (mm):160 mm x 290 mm x 48 mm ; |
| FAG 7304-B-MP-UA Angular Contact Ball Bearings | Taconite seal:TER 18; L:209.55 mm; P120°:7.56 kN; Pa:2.54 kN; J min.:158.75 mm; H1:57.15 mm; Ca:28.804 mm; J max.:177.8 mm; S:4.763 mm; Cap bolt:2 x 7/16-14 UNC; |
| 1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter NTN 3206B Angular Contact Ball Bearings | Grease Speed Rating Open/Shielded n1:2200 rpm; d:180.000 mm; Sealed Speed Rating n3:1500 rpm; B:33.00 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:132000 N; D:250.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Basic Dynamic Radial Load Rating C:119000 N; Size (mm):1.181 Inch | 30 Millimeter x 2.441 Inch | 62 Millimeter x 0.937 Inch | 23.8 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter NTN 7312BL1G/GN Angular Contact Ball Bearings | Material constant KM:330; l1 min.:53 mm; B:20 mm; dk:35.5 mm; l2 max.:128 mm; r1 min.:0.6 mm; d2 max.:65 mm; h:94 mm; d:25 mm; Mass rod end:0.53 kg; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter ; |
| 35 mm x 80 mm x 34,9 mm FAG 3307-BD-2Z-TVH Angular Contact Ball Bearings | ra max.:3 mm; Da max.:723 mm; Minimum load factor A:230; D:800 mm; Mass bearing (including seat washer where applicable):105 kg; Basic static load rating C0:6700 kN; da min.:747 mm; H:105 mm; Fatigue load limit Pu:91.5 kN; Limiting speed:560 r/min; Size (mm):35 mm x 80 mm x 34,9 mm ; |
| 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 5205 Angular Contact Ball Bearings | da min.:79 mm; d:65 mm; Da max.:146 mm; Limiting speed:6000 r/min; B:37 mm; Calculation factor f0:12.3; Fatigue load limit Pu:3.15 kN; d1 ≈:94 mm; Db min.:172 mm; Reference speed:9500 r/min; Size (mm):0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter ; |
| FAG 7232-B-MP-UA Angular Contact Ball Bearings | B:22.00 mm; d:120.000 mm; Fillet Radius ra:1.00 mm; D:165.0000 mm; Sealed Speed Rating n3:2300 rpm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:3600 rpm; Basic Static Radial Load Rating Co:57000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Basic Dynamic Radial Load Rating C:55300 N; |
| 30 mm x 62 mm x 23,8 mm FAG 3206-BD-2Z-TVH Angular Contact Ball Bearings | Grease Speed Rating n1:1600 rpm; B:150.00 mm; d:180.000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:1270000 N; Oil Speed Rating n2:2400 rpm; Fillet Radius rb:1.00 mm; D:380.0000 mm; Basic Dynamic Radial Load Rating C:780000 N; Size (mm):30 mm x 62 mm x 23,8 mm ; |
Angular contact ball bearings - 3307-DA - medias - Schaeffler
3307-DA. Angular contact ball bearings main dimensions to DIN 628-3, double row, separable, with split inner ring, contact angle α = 45°
FAG | 3307-DA | Angular Contact Ball Bearing | Applied
Shop FAG 3307-DA at Applied.com, which includes; Angular Contact Bearing Type, 35 mm Inner Diameter, 80 mm Outer Diameter, 34.9 mm Width
3307-DA FAG • ABF Store
Product properties. Availability 0 pcs; Brand FAG; Item Number 3307-DA FAG; Technical details (DA) DA=Ball Bearing Double Row With Split Inner Ring
Double Row Angular Contact Ball Bearing Ref. Fag 3307-da
FAG 3307-DA. Double row angular contact ball bearing. Double row angular contact ball bearings can absorb high radial and axial forces in two directions
3307-DA - FAG Double Row Angular Contact Bearing
Product: 3307-DA-FAG | Brand: FAG | Size: 35x80x34.9mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
3307-DA-MA FAG - CBT Company
FAG Bearings 3307-DA-MA - Angular contact ball bearing
Bearing 3307-DA (FAG) | Size and Specification | Bearings
Angular contact ball bearings 3307-DA. Bearing number : 3307-DA. Size (mm) : 35x80x34.9. Brand : FAG. Bore Diameter (mm) : 35. Outer Diameter (mm) : 80
FAG (Schaeffler) 3307-DA - Double Row Angular Contact
FAG (Schaeffler) 3307-DA - Double Row Angular Contact Bearing - 35 mm Bore, 80 mm OD, 1.3750 in Width, Open, 25 ° Contact Angle, C0 - - Amazon.com
FAG 3307-DA bearings - FAG BEARING - Products - SKF
The Schaeffler Group were incorporated to fulfill all your demands regarding FAG 3307-DA double row angular contact ball bearings. We are the world's second
35 mm x 80 mm x 34,9 mm FAG 3307-DA Angular Contact Ball Bearings Video