| No. | Brand | a | J | F | l | D | G | s | H |
| 7602040-TVP | FAG | - | - | - | - | - | - | - | - |
| 7322BL1 | NTN | - | - | - | - | - | - | - | - |
| 3206B | NTN | - | - | - | - | 250.0000 mm | - | - | - |
| 5206CLLUC3 | NTN | - | - | 50 mm | - | 80 mm | - | 1.5 mm | - |
| 3204 | NTN | - | - | - | - | - | - | - | - |
| 5204CZZC3 | NTN | - | - | - | - | 30.0000 mm | - | - | - |
| 5201CZZ | NTN | - | - | - | - | 90.0000 mm | - | - | - |
| 3208-BD | FAG | - | - | - | - | 140.0000 mm | - | - | - |
| 7232-B-MP-UO | FAG | - | - | - | - | - | - | - | - |
| 5205 | NTN | - | - | - | - | - | - | - | - |
| 7205BYG | NSK | - | - | - | - | 150.0000 mm | - | - | - |
| 5206NR | NTN | - | - | - | - | 400.0000 mm | - | - | - |
| 5200CZZ | NTN | 12.5 mm | - | - | - | 250 mm | - | - | - |
| 7328BX1WGDB/GL/4SQT | NTN | - | - | - | - | - | - | - | - |
| 3208-BD-TVH | FAG | - | - | - | 9 mm | 180 mm | - | - | - |
| 3310-BD-TVH | FAG | - | - | - | - | - | - | - | - |
| 7302-B-JP-UA | FAG | - | - | - | - | 380 mm | - | - | - |
| 7204BMPC | NSK | - | - | - | - | - | - | - | - |
| 3209-BD-2Z-TVH | FAG | - | - | - | - | - | - | - | - |
| 7312BL1BG | NTN | - | - | - | - | 140.0000 mm | - | - | - |
| 35 x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter NSK 7207BEAT85 Angular Contact Ball Bearings | Mass bearing unit:4.99 kg; da:44.45 mm; N1:14.287 mm; A6:19.05 mm; L:139.7 mm; S:0.794 mm; A:57.15 mm; B:73.025 mm; J:111.125 mm; Attachment bolt diameter G:12.7 mm; Size (mm):35 x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 5205 Angular Contact Ball Bearings | da min.:79 mm; d:65 mm; Da max.:146 mm; Limiting speed:6000 r/min; B:37 mm; Calculation factor f0:12.3; Fatigue load limit Pu:3.15 kN; d1 ≈:94 mm; Db min.:172 mm; Reference speed:9500 r/min; Size (mm):0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter ; |
| 2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter NTN 7312BL1G/GN Angular Contact Ball Bearings | Material constant KM:330; l1 min.:53 mm; B:20 mm; dk:35.5 mm; l2 max.:128 mm; r1 min.:0.6 mm; d2 max.:65 mm; h:94 mm; d:25 mm; Mass rod end:0.53 kg; Size (mm):2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 1.22 Inch | 31 Millimeter ; |
| 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter NTN 7310BL1G/GN Angular Contact Ball Bearings | Sealed Speed Rating n3:2600 rpm; Accessories:Shield & Seal; Basic Static Radial Load Rating Co:54000 N; Fillet Radius ra:1.50 mm; d:100.000 mm; B:24.00 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Dynamic Radial Load Rating C:63700 N; D:150.0000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Size (mm):1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.063 Inch | 27 Millimeter ; |
| 50 mm x 110 mm x 44,4 mm FAG 3310-BD-TVH Angular Contact Ball Bearings | r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; dk:66 mm; Da min.:66.2 mm; Sealing solution:Triple-lip seals; Specific static load factor K0:500 N/mm²; Lubricant:Regular relubricatio; b1:4.6 mm; C:28 mm; Basic static load rating C0:780 kN; Size (mm):50 mm x 110 mm x 44,4 mm ; |
| FAG 7236-B-MP Angular Contact Ball Bearings | Static axial stiffness, preload class A:40 N/µm; Reference grease quantity Gref:1.44 cm³; d:40 mm; Preload class A GA:45 N; Number of balls z:21; D1:54.9 mm; Fatigue load limit Pu:0.36 kN; Basic dynamic load rating C:12.4 kN; ra max.:0.6 mm; Da max.:58.8 mm; |
| 1.575 Inch | 40 Millimeter x 2.441 Inch | 62 Millimeter x 0.945 Inch | 24 Millimeter NTN 7908CDTBTUPV2 Angular Contact Ball Bearings | Fillet Radius ra:2.00 mm; d:420.000 mm; Basic Dynamic Radial Load Rating C:251000 N; Grease Speed Rating Open/Shielded n1:950 rpm; Basic Static Radial Load Rating Co:390000 N; Sealed Speed Rating n3:0 rpm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:1200 rpm; D:520.0000 mm; B:46.00 mm; Size (mm):1.575 Inch | 40 Millimeter x 2.441 Inch | 62 Millimeter x 0.945 Inch | 24 Millimeter ; |
| FAG 7238-B-MP-UA Angular Contact Ball Bearings | Basic static load rating C0:2400 kN; Da max.:410 mm; das:360 mm; D:420 mm; d1 ≈:368 mm; b1:9.4 mm; K:5 mm; rb max.:2 mm; B:80 mm; da min.:351 mm; |
| FAG 7232-B-MP-UO Angular Contact Ball Bearings | Basic dynamic load rating C:1456 kN; d3:240 mm; B:104 mm; D1 ≈:275 mm; Basic static load rating C0:2080 kN; Reference speed:1500 r/min; B4:30.5 mm; r1,2 min.:3 mm; B1:141 mm; Limiting speed:2000 r/min; |
| 40 mm x 80 mm x 30,2 mm FAG 3208-BD-2Z-TVH Angular Contact Ball Bearings | Basic Static Radial Load Rating Co:176000 N; d:80.000 mm; D:200.0000 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Fillet Radius ra:2.50 mm; B:48.00 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating Open/Shielded n1:2800 rpm; Basic Dynamic Radial Load Rating C:176000 N; Size (mm):40 mm x 80 mm x 30,2 mm ; |
| 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 5205CZZ Angular Contact Ball Bearings | Material constant KM:330; Mass rod end:15 kg; h1:230 mm; d:80 mm; l5 ≈:45 mm; B:55 mm; l7 min.:90 mm; C1 max.:48 mm; l4 max.:324 mm; Specific dynamic load factor K:150 N/mm²; Size (mm):0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter ; |
| 5.118 Inch | 130 Millimeter x 11.024 Inch | 280 Millimeter x 2.283 Inch | 58 Millimeter NTN 7326BGM Angular Contact Ball Bearings | Stabilizing ring:2 x SR-1517; Mass pillow block:16.5 kg; Taconite seal:TER 54; P90°:36.9 kN; H2:31.75 mm; da:76.2 mm; R1:53.975 mm; Da:150 mm; A2:198.438 mm; h:36.513 mm; Size (mm):5.118 Inch | 130 Millimeter x 11.024 Inch | 280 Millimeter x 2.283 Inch | 58 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.591 Inch | 15 Millimeter NSK 7205BYG Angular Contact Ball Bearings | D:150.0000 mm; Sealed Speed Rating n3:2800 rpm; Basic Dynamic Radial Load Rating C:153000 N; Accessories:One Seal & Snap-Ring; B:66.70 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:125000 N; d:70.000 mm; Grease Speed Rating n1:2800 rpm; Size (mm):0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.591 Inch | 15 Millimeter ; |
| 17 mm x 47 mm x 14 mm FAG 7303-B-JP Angular Contact Ball Bearings | D:100.0000 mm; Basic Dynamic Radial Load Rating C:33800 N; B:18.00 mm; d:65.000 mm; Sealed Speed Rating n3:4000 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:77500 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; Basic Static Radial Load Rating Co:27000 N; Accessories:Without Accessories; Size (mm):17 mm x 47 mm x 14 mm ; |
| 0.394 Inch | 10 Millimeter x 1.181 Inch | 30 Millimeter x 0.563 Inch | 14.3 Millimeter NTN 5200CZZ Angular Contact Ball Bearings | Mass bushing:16.6 kg; a:12.5 mm; B:250 mm; h:232.5 mm; D:250 mm; Coefficient of friction µ max.:0.15; Tolerance shaft:e7; Specific static load factor K0:45 N/mm²; d:230 mm; α:124 °; Size (mm):0.394 Inch | 10 Millimeter x 1.181 Inch | 30 Millimeter x 0.563 Inch | 14.3 Millimeter ; |
| 0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter NTN 5205CZZC3 Angular Contact Ball Bearings | Lock washer:W 10; B1:60.554 mm; d:50 mm; Lock nut:N 10; G:49.962 mm; d3 max.:68.402 mm; d1:42.862 mm; B:12.954 mm; Mass adapter sleeve assembly:0.39 kg; Hydraulic nut:HMVC 10E; Size (mm):0.984 Inch | 25 Millimeter x 2.047 Inch | 52 Millimeter x 0.811 Inch | 20.6 Millimeter ; |
FAG 7232-B-MP Angular contact ball bearings - Nodes bearing
FAG 7232-B-MP bearing, Angular contact ball bearing, Dimensions: 160mm x 290mm x 48mm, Cr: 241000N, C0r: 305000N, Limiting Speeds:3500 1/min
7232-B-MP-UA FAG • ABF Store
7232-B-MP-UA FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
FAG (Schaeffler) 7232-B-MP-UO - Angular Contact Bearing
FAG (Schaeffler) 7232-B-MP-UO - Angular Contact Bearing - 160 mm Bore, 290 mm OD, 48 mm Width, Open, 40 ° Contact Angle - - Amazon.com
7232 B-MP FAG Angular Contact Bearing 160x290x48
7232 B-MP FAG Angular Contact Bearing 160x290x48 ... Brand: FAG Bearing Type: Single Row Angular Contact Measurement Unit: Metric Inside Diameter:
FAG | 7232-B-MP-UA | Angular Contact Ball Bearing | Applied
Shop FAG 7232-B-MP-UA at Applied.com, which includes; Angular Contact Bearing Type, 160 mm Inner Diameter, 290 mm Outer Diameter, 48 mm Width
Angular contact ball bearings - 7232-B-MP - medias - Schaeffler
7232-B-MP. Angular contact ball bearings main dimensions to DIN 628-1, contact angle α = 40°. Send to shopping basket. Angular contact ball bearings
7232-B-MP FAG • ABF Store
7232-B-MP FAG available at ABF.store ✓ Same-day shipment ✓ 7.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
7232-B-MP - FAG Angular Contact - Quality Bearings Online
Product: 7232-B-MP | Brand: FAG | Size: 160x290x48mm | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online
FAG (Schaeffler) - 7232-B-MP-UA - Motion Industries
Buy FAG (Schaeffler) Angular Contact Bearings 7232-B-MP-UA direct from Motion Industries. Your proven service leader with reliable delivery since 1972
160 mm x 290 mm x 48 mm FAG 7232-B-MP Angular Contact Ball Bearings Video